Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 9 of 9
  1. #1
    Join Date
    Aug 2004
    Location
    Milan Michigan
    Posts
    1,681

    Default New 3/4" Impact gun 1560 Ft Lbs of torq.

    I have been working on alot more big trucks now that I have a bigger facility which requires a bigger impact than my 1/2" will do.

    I was looking at the Ingersorrand 3/4" drive that kicks out a whopping 1350 ftlbs of torque.

    But a friend of mine told me about the one made by Proto which has 1560 FT. Lbs. Mod # J175WP. ____________________________________ $ 352.87

  2. #2
    Join Date
    Sep 2005
    Location
    northern NJ
    Posts
    1,821

    Default

    Man that sounds like a great deal. No more struggling with your 1/2" gun & breaker bars with pipe extensions.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

  3. #3
    Join Date
    Apr 2013
    Location
    metro Detroit
    Posts
    71

    Default

    I work on tractor trailers every day. To get that kind of torque you will need to run it on a 1/2"air line

  4. #4
    Join Date
    Dec 2004
    Location
    Maryland
    Posts
    134

    Default Impact Gun

    If your in the market for one ToolTopia has good prices.

  5. #5
    Join Date
    Aug 2004
    Location
    Milan Michigan
    Posts
    1,681

    Default

    Along with the impact I bought 1/2" hose, 3/4" drive deep well socket set up to 1-7/8" and the big fittings.

  6. #6
    Join Date
    Aug 2004
    Location
    Milan Michigan
    Posts
    1,681

    Default

    Up date on the price, They called me back to say they had the wrong price so it went from $ 352.87 to $ 435.64

  7. #7

    Default New 3/4" Impact gun 1560 Ft Lbs of torq.

    Fyi u will probably need 12-15 cfm compressor and at least a 30 gallon tank along with the1/2 inch feed

  8. #8
    Join Date
    Aug 2004
    Location
    Milan Michigan
    Posts
    1,681

    Default

    I have a 80 gallon tank and approximately 23 cfm at 175 psi, I borrowed a friends 1" impact for this job, still waiting for mine to arrive.

    We mounted a Prentice crane on the log truck that we have been working on, there are eight 1-1/4" bolts that hold it on, The impact was as my daughters would say ( Amazing ) I tried to get a little extra torque on them with a 24" adjustable wrench and a 3' pipe over the handle, I couldn't budge it.

    I'm use to 1/2" impacts, this was a big upgrade.

  9. #9
    Join Date
    Sep 2005
    Location
    16919 Pole Rd. Brethren, MI 49619
    Posts
    4,376

    Default

    You do spray threads with weasel pee before running them on? The Proto is still a good deal, I paid 200 more for my IR 20 yrs ago.
    Attached Images Attached Images
    Last edited by Sberry; 03-06-2014 at 06:25 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 62

Welding Projects

Special Offers: See the latest Miller deals and promotions.

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 137