Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 5 of 5
  1. #1

    Default Blue Star 185 Stator Removal

    I need to remove the stator on a Blue Star 185 to clean out a dirt dobber nest. What comes next after taking the 4 long bolts out from the endplate? It looks like I need to remove the center bolt that goes into the rotor shaft so that the bearing can come off with the endplate, but not certain if that bolt is left-hand or right-hand threaded and the best way to get it out...Thanks for your help. Also, is there a service manual available that would have these procedures documented?

  2. #2
    Join Date
    Sep 2009
    Location
    Canada
    Posts
    185

    Default

    What engine is in that welder?
    Has the motor lost spark?
    Any small engine I have ever worked on has the stator under the flywheel. This the flywheel has to be removed first.
    Lincoln Idealarc 250 stick/tig
    Miller Bluestar 2E
    Thermal Dynamics Cutmaster 52
    Torchmate CNC table

    Ironworker Welder
    Operating engineer
    Owner/Operator Devlin Metal Works
    Custom CNC Plasma Cutting and Welding

  3. #3
    Join Date
    Dec 2010
    Location
    Andover, Ohio
    Posts
    101

    Default

    Welcome to the forum Charles76901.

  4. #4
    Join Date
    Oct 2004
    Location
    Edmonton, Alberta
    Posts
    7,846

    Default

    The rotor needs to be pushed off the engine, there are threads in the shaft that I think are 3/8" can't remember, so get yourself some redirod and a couple nuts

  5. #5
    Join Date
    Aug 2008
    Location
    Orange, TX
    Posts
    1,215

    Default

    Charlie, no need to remove the rotor or its center bolt to get the stator off on the Blue Star 185. Just remove the endbell cover, pull the 4 bolts holding the stator housing to the engine adapter plate, remove the brushes and holder assembly, pry the endbell off the rotor bearing and then slide the stator housing off over the rotor.
    MM200 w/spot controller and Spoolmatic 1
    Syncrowave 180 SD
    Bobcat 225G Plus LPG/NG w/14-pin*
    *Homemade Suitcase Wire Feeder
    *HF-251D-1
    *WC-1S & Spoolmatic 1
    PakMaster 100XL
    Marquette "Star Jet" 21-110

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.