Does anyone have any experience with this combination? If so could you help me out with voltage/wire speed settings for different thicknesses of aluminum using. 030 and. 035 wire sizes? I've been playing around with it. Some pointers or settings that work for u would be great appreciated.
Results 1 to 3 of 3
Thread: Spoolmate 100 and 211 auto-set
02-25-2014, 06:52 PM #1Junior Member
- Join Date
- Feb 2014
Spoolmate 100 and 211 auto-set
02-26-2014, 02:25 PM #2
AutoSet is for MILD STEEL only.
Aluminum: Look at the chart in your manual or on the side of the door to set the machine- start from there and adjust.
Last edited by Broccoli1; 02-26-2014 at 02:28 PM.Ed Conley
Passport Plus w/Spool Gun
Miller 125c Plasma 120v
SO 2020 Bender
You can call me Bacchus
02-26-2014, 04:27 PM #3
Stick with .030 wire the smaller machines run it better. If you burn up lots of tips look me up...BobBob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
Spool Gun conversion. How To Do It. Below.