I AM HAVING DIFFICULTY PERFORMING SMAW WITH MY CP-250TS MACHINE, I AM USING E-6010 X 1/8" AND E-7018 1/8". THE MACHINE IS HAVING TROUBLE HOLDING THE ARC UNLESS I RAISE THE VOLTAGE OUTPUT TO 50 + VOLTS.
ARE THERE WIRING TERMINAL CHANGES THAT SUPPORT THE SMAW WELDING PROCEDURES. I PROVIDED A JUMPER WIRE BETWEEN TERMINALS 20 AND 21 TO BYPASS THE TRIGGER CONTROL. CAN THIS MACHINE BE USED TO PERFORM SMAW?
Mark Blais