Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2014
    Posts
    1

    Default miller aead 200 le problems

    Hey i have a 85 miller aead 200le serial # Jg137113 with a b48m onan engine. When i first bought it about a year ago it welded fine.. Now it seems like its losing power. Used to be able to weld a 5/32 7018(approximatley 165-175amps?) not it barely welds a 3/32
    7018(100 amps max) ... And when i start welding and put a load on machine, engine boggs down n runs at low speeds almost to where it dies but hasent yet. And the engine is leaking oil from somewhere around the left side head cover.. Oil everywhere.. I havent cleaned the oil off to see where its comming from yet. I took the covers of the welder today and cleaned out a bunch of dirst, dust, grime, leaves, and dirt dobber nests. The fine tune rheostat had like some gunk caked up on it so i took a wire brush to it and looks alot better.. Pretty much cleaned everything... Havent tried to run it agin yet.. Thinking about trying to fix the oil leak before i run it anymore... Any thoughts or solutions to these problems would be much appreciated.. Thanks

  2. #2
    Join Date
    Apr 2013
    Location
    Southeast idaho
    Posts
    30

    Default miller aead 200 le problems

    One thing to think about is if a crankcase seal has blown I would check the breather to see if it was bad to. But see where the leak is at first.

  3. #3
    Join Date
    Aug 2008
    Location
    Orange, TX
    Posts
    1,214

    Default

    PM and email sent.
    MM200 w/spot controller and Spoolmatic 1
    Syncrowave 180 SD
    Bobcat 225G Plus LPG/NG w/14-pin*
    *Homemade Suitcase Wire Feeder
    *HF-251D-1
    *WC-1S & Spoolmatic 1
    PakMaster 100XL
    Marquette "Star Jet" 21-110

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.