Hi guys I have a miller shopmaster 300 and in CC the voltage/current settings work just fine from the front panel or from a foot pedal when tig welding but when I switch to CV for my wire feeder it is stuck at max voltage/current no matter what the knob is set at.
I have took the side panels off and looked for anything obvious but all looks good any help you guys could give me would be great .............. Thanks......
Results 1 to 1 of 1
02-23-2014, 02:27 PM #1Junior Member
- Join Date
- Feb 2014
miller shopmaster 300 only maximum weld output in cv