I have a Weldcraft TIG torch and a Miller Pheonix 456..........how do I put the two together? Its gotta be pretty simple but I cant find any other help on the web
Results 1 to 3 of 3
01-30-2014, 12:28 AM #1Junior Member
- Join Date
- Jan 2014
Need help hooking up Air-Cooled TIG torch to Miller Pheonix 456!
01-30-2014, 01:26 PM #2
because I am not seeing a gas solenoid on the Phoenix... I could be wrong..
you wll need a powerblock to connect the torch to the Phoenix
it is a 45V62 200amp for a large air cooled TIG torch that has the integral power cable built into the hose...
Pretty self explanatory... it connects to the welder power stud... one side threaded for the fitting on the torch... the other side accepts standard argon gas hose fitting that goes to regulator and gas bottle..
the Phoenix does have the standard 14pin connector so you could use a RFCS_14 pedal..
(see the manual)
Last edited by H80N; 01-30-2014 at 01:32 PM..
The more you know, The better you know, How little you know......
“The bitterness of poor quality remains long after the sweetness of low price is forgotten”
Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...
My Blue Stuff:
Dynasty 350DX Tigrunner
Millermatic 350P w/25ft Alumapro & 30A
TONS of Non-Blue Equip, plus Mills, Lathes & a Rat Tail File..
01-30-2014, 01:49 PM #3
What I do, is merely get myself the dinse or reg camlock connector that goes into the machine and a tig block. Then I braze the 2 together. Easy peasy.