Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Hybrid View

  1. #1
    Join Date
    Jun 2009
    Location
    greenfield new hampshire
    Posts
    878

    Default just bought a new mm252, having gun issues

    just above the nozzle sits a plastic ring that covers the upper end of the nozzle, crank up the welder and it melts, miller is aware of this, their responce, yep it does melt when the machine is pushed, pushed they say, i say used as designed, any one else seen this happen

  2. #2
    Join Date
    Sep 2005
    Location
    Salem ,Ohio
    Posts
    3,919

    Cool

    I have melted bags of them in the last 2 years. Anything above 24V and she will melt. So i stay 23.3 and zero problems. I also use nozzle dip that's half dip and 1/2 water. I use mine 9 1/2 hours a day everyday...Bob
    Bob Wright, Grandson of Tee Nee Boat Trailer Founder
    Metal Master Fab Salem, Oh 44460
    Birthplace of the Silver & Deming Drill
    1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

  3. #3
    Join Date
    Aug 2009
    Location
    Ocala Fl.
    Posts
    43

    Default

    Thats some good info, I still have not pushed my unit, but I do not use it to make a living. As allways good info to have.

  4. #4
    Join Date
    Nov 2009
    Location
    western mass
    Posts
    205

    Default

    shock collar I believe its called. really just another consumable in my book. just like tips. buy a bag of them and get over it. I think there about a buck each.

  5. #5
    Join Date
    Jun 2009
    Location
    greenfield new hampshire
    Posts
    878

    Default

    bob, do you have any problems taking the gun apart to put the collar on, its a crazy set up, brass, copper, fine threads close to .75" long. my gun came apart real hard, i can see issues here down the road, is this a problem, taking it apart after a while. thanks. kevin

  6. #6
    Join Date
    Jun 2009
    Location
    greenfield new hampshire
    Posts
    878

    Default

    bob i need to type fast,the forum times out after a few minutes when i reply??????????. wouldnt you think miller would do a better job with the gun, the welder is great, sprays real nice, except the gun melts??????????

  7. #7
    Join Date
    Sep 2005
    Location
    Salem ,Ohio
    Posts
    3,919

    Cool

    Quote Originally Posted by kevin View Post
    bob, do you have any problems taking the gun apart to put the collar on, its a crazy set up, brass, copper, fine threads close to .75" long. my gun came apart real hard, i can see issues here down the road, is this a problem, taking it apart after a while. thanks. kevin
    Yes i do. The fine threads will strip off. I do use neverseeze too. I have stripped the necks on 2 guns and just dug thru the dumpster a few days ago and found a donor neck to swap out. Told the buyer to order me 2 spare necks as they are simple enough to replace...Bob
    Bob Wright, Grandson of Tee Nee Boat Trailer Founder
    Metal Master Fab Salem, Oh 44460
    Birthplace of the Silver & Deming Drill
    1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

  8. #8

    Default just bought a new mm252, having gun issues

    When I had my 252 I changed the gun out to a q300 also. They can be had new off of eBay for less than $100 if you watch the auctions.

  9. #9
    Join Date
    Jun 2009
    Location
    greenfield new hampshire
    Posts
    878

    Default

    gotta tell ya, Miller is the best of the best in welding equipment, their equipment is top shelf and their service is equal, I explained to my rep the down falls of the gun that is supplied with the welder, i compared it to driving a rolls royce using a pinto steering wheel. my local rep talked to miller, explained my case, they swapped out a bernard q gun. they stand behind their people, service is huge,

  10. #10
    Join Date
    Jun 2009
    Location
    greenfield new hampshire
    Posts
    878

    Default

    i need to type fast, my computer times out on this forum, dont know why. i have been buying miller since 1986, over 10 welders, any issues that i had were always fixed with a phone call, then a hand shake. their service is the best in the industry.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.