I have a slight issue that I was hoping this group could help me with. I recently finished converting my syncrowave 200 to a water cooled torch. I went to weld some aluminum for the first time after converting and I cannot get it to weld, seams like I'm not getting any etching action and the weld pool instantly contaminates. Can't add any filler or anything. I swapped to my air cooled torch and it runs perfect. Not sure what ls what's going on. Here's my current set up.
Results 1 to 10 of 19
12-11-2013, 06:38 AM #1Junior Member
- Join Date
- Mar 2009
Water-cooled tig torch conversion fail