Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 19

Hybrid View

  1. #1
    Join Date
    Mar 2009
    Posts
    10

    Default Water-cooled tig torch conversion fail

    Morning all,
    I have a slight issue that I was hoping this group could help me with. I recently finished converting my syncrowave 200 to a water cooled torch. I went to weld some aluminum for the first time after converting and I cannot get it to weld, seams like I'm not getting any etching action and the weld pool instantly contaminates. Can't add any filler or anything. I swapped to my air cooled torch and it runs perfect. Not sure what ls what's going on. Here's my current set up.




  2. #2
    Join Date
    Jul 2010
    Location
    Four Flags city
    Posts
    298

    Default

    It does not look like you used a 195380 dinse adapter. How did you hook up weld power and water to the torch?
    The adapter wil facilitate hook up of power(return water) and gas.

    Does you cooler have an Oberdorfer pump or Procon?
    Last edited by big mike; 12-11-2013 at 07:07 AM.

  3. #3
    Join Date
    Mar 2009
    Posts
    10

    Default

    Quote Originally Posted by big mike View Post
    It does not look like you used a 195380 dinse adapter. How did you hook up weld power and water to the torch?
    The adapter wil facilitate hook up of power(return water) and gas.

    Does you cooler have an Oberdorfer pump or Procon?
    Not sure at all about the cooler. As for the adapter it is the correct one. Seporate a the gas and return water, sure wasn't cheap.

  4. #4
    Join Date
    Mar 2009
    Posts
    10

    Default


  5. #5
    Join Date
    Mar 2009
    Posts
    10

    Default

    I was thinking since I have the return-water and to-water bolted to the machine that it was grounding out. I unhooked them from the machine with no change. Next I'm going to separate the return and feed/to water from each other and see if that resolves the issue.

  6. #6
    Join Date
    Jul 2010
    Location
    Four Flags city
    Posts
    298

    Default

    I can't see clearly if they are hooked up this way but I believe it should be,
    Red(power cable) into the back of the Dinse
    Red from the Dinse to the cooler
    Blue to the cooler
    Black to the Dinse

    Are you sure you don't have a bad power cable?

  7. #7
    Join Date
    Nov 2003
    Posts
    2,983

    Default

    I would ask what coolant fluid you are using??

    water?

    distilled water??

    premixed low conductivity TIG coolant??

    car antifreeze??

    would also ask the brand and model of water cooled torch and collets... some of the soft chinese copper collets can crush and restrict argon flow.... leading to symptoms you described...
    Last edited by H80N; 12-11-2013 at 08:35 AM.
    .

    *******************************************
    The more you know, The better you know, How little you know......

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus Mills, Lathes & a Rat Tail File..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 62

Welding Projects

Special Offers: See the latest Miller deals and promotions.

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 137