Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 8 of 8
  1. #1
    Join Date
    Dec 2013
    Posts
    3

    Default Miller Rancher 250G

    Hey fellas, new guy here.

    I have an old Trailblazer 250G, Serial number JH 204421. It still runs great, but after sitting on the back of a farm truck and in a barn for years and years, the face plate is all worn off and I can't read anything on it. Of course the amp setting is no big deal to figure out, but it would be nice to know what some of the other switches and dial settings are. Miller does not offer a replacement part for it anymore and directed me to here. If there is anyone who possibly has a faceplate laying around or the easiest solution is if anyone who has one could snap a few photos of it for me would be greatly appreciated.

    And if this is posted in the complete wrong spot, I apologize.

    **Edit**
    Miller TRAILBLAZER. Not rancher....its been a long day.

    Thanks for the help!
    Last edited by EricM91; 12-09-2013 at 07:35 PM.

  2. #2
    Join Date
    Feb 2009
    Location
    Lodi, CA
    Posts
    1,287

    Default

    Click on "resources" above, you can find the correct owners manual for your machine. Download it, there should be a drawing and description of the faceplate and all the functions of the switches in there somewhere.
    Obviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....

  3. #3
    Join Date
    Mar 2011
    Location
    st-eustache qc.canada
    Posts
    226

    Smile there are a ton of pictures

    Google search : miller trail blazer 250G images. some are blurred some other may be of some help.

    good luck.

  4. #4
    Join Date
    Nov 2003
    Posts
    3,265

    Thumbs up

    Here is a link to the manual that is correct for your serial number..

    http://www.millerwelds.com/om/o426_mil.pdf

    worst case.. you could always mark the faceplate with a Sharpie...
    Last edited by H80N; 12-10-2013 at 07:03 AM.
    .

    *******************************************
    The more you know, The better you know, How little you know......

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam..

  5. #5
    Join Date
    Dec 2013
    Posts
    3

    Default

    Quote Originally Posted by H80N View Post
    Here is a link to the manual that is correct for your serial number..

    http://www.millerwelds.com/om/o426_mil.pdf

    worst case.. you could always mark the faceplate with a Sharpie...

    Thats pretty much the plan but hey thank you very much sir! That link helps me a lot. I appreciate it.

  6. #6
    Join Date
    Feb 2012
    Location
    Wa
    Posts
    590

    Default

    I clicked on this thread wondering what the heck a miller rancher was. Haha

  7. #7
    Join Date
    Dec 2013
    Posts
    3

    Default

    Yeah that was a major my bad. Ill have to snap a couple photos of the dusty ole gal. Since its for farm use between 2 cattle ranches, I built a frame it is bolted on that holds torch bottles and a small toolbox and you can pick it up with tractor forks and move it where its needed. We are about to start construction on a free stall dairy barn and I will be doing most of the welding.

  8. #8
    Join Date
    May 2011
    Location
    Bossier Parish La.
    Posts
    550

    Default

    Quote Originally Posted by Cgotto6 View Post
    I clicked on this thread wondering what the heck a miller rancher was. Haha
    Me too, I thought Miller had snuck in a new model that I hadn't heard about. Maybe something built with the rancher/farmer in mind.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.