I am trying to run a 50 ft. power cord to my new dynasty 350. Which wire gauge size I should use for this purpose to ensure I will not overheat anything when welding at high amperages (6 AWG possibly?). I am wiring the welder for single phase to a NEMA 6-50 receptacle (250v). Does the length of my torch and/or the length of my ground have any bearing on the size requirements of this cord? Torch length is 25 ft. and ground is 35 ft. Any suggestions are greatly appreciated.
Results 1 to 8 of 8
09-21-2013, 10:25 PM #1Junior Member
- Join Date
- Sep 2013
What Wire Gauge for Power Cord of Dynasty 350