Earlier in the year, I bought my spectrum 375 x-treme plasma cutter. I used it twice. Today, It will not operate. Machine turns on, when I pull the trigger the power light starts to blink.
Things I've checked and verified:
Voltage is 240v also tried on the 110v plug
pressure is within range and have adjusted it from 90-130 psi.
tips, etc are brand new miller
moisture trap inside machine is fine
I have looked all of the older posts on this machine with similar problems and have come up with nothing. Any help would be greatly appreciated!
Results 1 to 3 of 3
09-15-2013, 01:14 PM #1Junior Member
- Join Date
- Sep 2013
Spectrum 375 x-treme power light blinking