Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2012
    Location
    AZ
    Posts
    49

    Default Receiver Adapter

    Right after I got my new Hobart Handler 190 and told my friend about it, he asked if I would weld something up for him. Of course I said, "Sure!" He knew I had no experience with MIG outside of the few test pieces I did on steel and aluminum.

    He cut the pieces and I welded them. After a rough start and burning a tip, the welds improved noticeably toward the end. After all I was learning on the job, and he was OK with that. Not the prettiest welds, but the finished work is square, not warped, and plenty strong in my opinion and his too.

    He has two quads that he wanted to be securely linked together when he transported them on his trailer. However, the front receiver on one is three inches higher than the rear receiver of the other. A simple project, but the first I've ever done for anyone.
    SANY1960.jpgSANY1965.jpg

  2. #2
    Join Date
    Dec 2012
    Location
    Front Royal, Va
    Posts
    64

    Default

    Looks good. I guess that's a way of making them more secure.
    HH 210MVP
    Spoolrunner 100
    Powercraft AC buzz box
    Lotas LTP5000D plasma
    Victor Oxy/Acet
    30 ton press
    A few brand name tools
    Lots of no name tools
    A wife to worry me
    and 4 dogs to supervise me

  3. #3
    Join Date
    Dec 2012
    Posts
    23

    Default

    That's a neat idea..security and safe guards against them smashing together.

  4. #4
    Join Date
    Apr 2011
    Posts
    360

    Default

    If he went back to back he could just use the winchs to secure them to the trailer...
    MillerMatic 211 Auto-set w/MVP
    Just For Home Projects.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.