Hello guys, my 350 is giving me a problem again. When I turn the machine on the panel reads 1 volt and 1 amp. The high frequency is running constantly, the switch for it is in start only mode.
I can't get an arc established. The high frequency is working, but not enough amperage.
I checked the wiring on the pedal, it looked good. I then removed the pedal and switched to *panel* setting.
Does anyone have any idea what could cause this?
Serial number is KA754122
Results 1 to 3 of 3
Thread: Syncrowave 350 problem
08-20-2013, 09:34 PM #1Junior Member
- Join Date
- Feb 2011
Syncrowave 350 problem