I've been asked to archive a 3mm tig weld on 1/8th aluminium with 100% penetration.
I can't go bigger than 3.5 mm.
There has to be some burn through to be machined off after.
I don't think this can realistically archived.
Does any one have any ideas? Can any one do this?
I been tig welding for 10 years. This is the weirdest project yet.
Results 1 to 3 of 3
Thread: 3mm weld on 1/8 alum
08-07-2013, 11:57 AM #1Junior Member
- Join Date
- Jan 2013
3mm weld on 1/8 alum