Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 11

Hybrid View

  1. #1

    Default Miller matic 252 wire feed issues.

    I have a 252 that is New. Maybe burned 3 rolls of wire on it. Was welding with it Saturday and it got to welding like I didn't have enough wire speed. Going to call Miller tomorrow because it's under warranty, like i said it's only a few months old. Any body have any idea what could be wrong?

  2. #2
    Join Date
    Nov 2012
    Location
    Northern Arizona
    Posts
    479

    Default

    Did you go through the basics? Blow out the gun liner, check your lead connections at machine, check ground connection, make sure the wire tension is right, clean contact tip, etc?
    MillerMatic 251
    CST 280 w/tig torch
    HF-251-D1
    Cutmaster 42
    Victor Journeyman OA

    A rockcrawler, er money pit, in progress...

  3. #3
    Join Date
    Mar 2012
    Location
    Brookshire, Texas
    Posts
    21

    Default

    Gotta side with Elvis here, you need to go thru the troubleshoot process before you go through the hassle of warranty work, check your wire tension, make sure your rollers and tips match the size wire you are using, clear your liner and make sure your settings didn't change, change in voltage could cause your problem

  4. #4

    Default

    Yes, I've done all the easy checks......
    Quote Originally Posted by S.A.W View Post
    Gotta side with Elvis here, you need to go thru the troubleshoot process before you go through the hassle of warranty work, check your wire tension, make sure your rollers and tips match the size wire you are using, clear your liner and make sure your settings didn't change, change in voltage could cause your problem

  5. #5
    Join Date
    Nov 2012
    Location
    Northern Arizona
    Posts
    479

    Default

    Well, did you call? What was the recommendation?
    MillerMatic 251
    CST 280 w/tig torch
    HF-251-D1
    Cutmaster 42
    Victor Journeyman OA

    A rockcrawler, er money pit, in progress...

  6. #6
    Join Date
    Sep 2005
    Location
    Salem ,Ohio
    Posts
    3,908

    Cool

    I had a brand new MM252 with similar issues. The 5/8" wire spool nut was too tight. Almost backed it clear off before it worked well...Bob
    Bob Wright, Grandson of Tee Nee Boat Trailer Founder
    Metal Master Fab Salem, Oh 44460
    Birthplace of the Silver & Deming Drill
    1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

  7. #7
    Join Date
    May 2010
    Location
    Central CA
    Posts
    781

    Default

    Sometimes the wire does not come off the spool even. It could be bird nested somewhat.
    Or it gets wedged between spool and the rest of the wire.
    It just comes off the spool hard.
    Good Luck,
    Bob
    Millermatic 252 w/30A
    Big Blue Air Pak
    Ellis 3000 Band Saw
    Trailblazer 302 Air Pak w/ Wireless Remote
    8-RC
    Dynasty 200 DX
    XMT 350 MPa w/S-74 MPa Plus
    Millermatic 211
    Passport Plus
    Spectrum 625 X-TREME
    Lincoln SA-200 Blue Tint Red Face '63
    2-Lincoln SA-200 Red Face '68
    SA-200 Black Face '59
    SA-200 Green Lite '84
    SA-200 Green Lite '80
    SA-200 Red Face '69
    SA-200 Red Face '66
    SA-200 Green Lite '81
    '70 Black Face Round Barrel

  8. #8
    Join Date
    Dec 2007
    Location
    Little Rock
    Posts
    41

    Default Miller matic 252 wire feed issues.

    Wire is sold as either wound or "precision wound" (or some other such descriptive phrase). I always order the precision version at little or no more cost.

    I realize this may be hype but it occurs with reputable retailers and brands and I have had no problems using it.

  9. #9

    Default Bad gas.

    My gas was down to around 500 psi , Change the bottle problem solved.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.