Goodmorning everyone, hope y'all are having a nice weekend...
Here's my latest video, its another one I shot with Peter... This time, we're running an HTP spool gun welding up some Aluminum scraps, and we're running it off a 300 Amp Miller Diesel engine drive, "just because"
Anyway, hope y'all enjoy the video... Happy welding
Results 1 to 6 of 6
06-30-2013, 08:48 AM #1Member
- Join Date
- May 2012
Running a Spool Gun off a 302 Diesel
06-30-2013, 09:17 AM #2
Enjoyed that, Thanks for sharing.
06-30-2013, 05:54 PM #3
Never fond of the systematic guns. Much simpler to go with a Miller WC-24 and Miller 30A. Simply a better gun and parts are easily had,. That systematics control cable is a b.i.t.c.h. to fix. let alone the rest of the HTP crap. Why have a box to lug around,. That HTP / Systematics system is not worth the time. the money, nor the effort. As for remote, easy to twin a connection at the machine though its not often your gong to change voltages, Amps yes, but that is feed speed
Nice Vid though
Weld Alert ltd
35 - 40 CFH???, try 20 -25, 35 would freeze your weld too fast.
Last edited by cruizer; 06-30-2013 at 06:03 PM.
06-30-2013, 07:32 PM #4Senior Member
- Join Date
- Feb 2012
(35 - 40 CFH???, try 20 -25, 35 would freeze your weld too fast.)
You know cruzier I could have went a life time without knowing that . That kinda of stuff from you guys is why I read this site.
07-01-2013, 04:01 PM #5
Nice video, kinda a cool remote voltage control
I thought the remote voltage control deal was slick, It would have been handy on a couple jobs i have had. I do have the Miller wc-24 and the spoolmatic, but this could be a decent option for the money and depending on how often a guy was to use it. I guess the fact it can be configured for almost any make of machine has a plus in terms of getting a usable rig. Liked the way the guy showed how everything was hooked up and seemed very down to earth explaining it. Overall a good video in my opinion.I have a welding addiction
...the only stupid question is the one you didn't ask
07-02-2013, 11:48 AM #6
For voltage control merely twin the 14 connection at the machine