Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 15

Hybrid View

  1. #1
    Join Date
    Oct 2012
    Location
    kannapolis,nc
    Posts
    32

    Default another spoolgun ??

    I am getting a lot of conflicting stories. What spoolguns can I run off both my millermatic210 and my bobcat225? I know I need a adapter for the bobcat but which one? a WC-115A or a SGA-100C ? will the wire be hot all the time?

    I looked at the chart, according to that my 210 requires a spoolmate3035 and for my bobcat a spoolmate 3545(which is no longer produced) or a spoolmatic 15a or 30a. I've read elsewhere that I should be able to get one spoolgun for both(with an adapter for the bobcat). I am hoping to find someone here that has done this. What are my options?

    thanks

  2. #2
    Join Date
    Oct 2007
    Location
    Cave Creek Az
    Posts
    964

    Default

    3035 for the 211, add an sga100C to run off any DC CV power source.

  3. #3
    Join Date
    Dec 2011
    Posts
    385

    Default

    The Spoolmate 3545 is a little heavier version of the 3035. Download the manual and you will find that they both share the same motor and many other parts. The difference seems to be mostly a heavier barrel and buss bar and the gearbox assembly(likely to accommodate the different drive rolls). The 3545 has a higher duty cycle but the 3035 should work with your Bobcat within the lower duty cycle constraints using the SGA 100C. As Walker says the SGA 100C is specific to the 3035(also the 3545 and incidentally the spoolmate 185) not to a specific power supply. They all are 36 volt spool guns without on board speed controls. Wire speed control is done by the SGA 100C. Call miller and I'm sure they'll be more than happy to help you out. You would need the WC-115A with the contactor kit if you use the Spoolmatic 15A or 30A spoolguns for your Bobcat but you would have to investigate its ability to be connected to your 210.-Meltedmetal
    Last edited by Meltedmetal; 06-25-2013 at 10:44 AM.

  4. #4
    Join Date
    Oct 2012
    Location
    kannapolis,nc
    Posts
    32

    Default

    thanks for the info,

    they only make the 3545 in the hobart brand now

  5. #5
    Join Date
    Oct 2004
    Location
    Edmonton, Alberta
    Posts
    7,615

    Default

    Realistically a WC-115 (with contactor) for both, then you can run a spoolmatic 30A. And thats the gun you want.

  6. #6
    Join Date
    Dec 2007
    Location
    Los Angeles
    Posts
    2,837

    Default

    http://www.millerwelds.com/products/...poolmatic_30a/

    Then Click on

    "Get the information you need to hook up your Spoolmatic."
    Ed Conley
    http://www.screamingbroccoli.net/
    MM252
    MM211
    Passport Plus w/Spool Gun
    TA185
    Miller 125c Plasma 120v
    O/A set
    SO 2020 Bender
    You can call me Bacchus

  7. #7
    Join Date
    Oct 2012
    Location
    kannapolis,nc
    Posts
    32

    Default

    Quote Originally Posted by cruizer View Post
    Realistically a WC-115 (with contactor) for both, then you can run a spoolmatic 30A. And thats the gun you want.
    this will work with my mm210 and bobcat? I can get this setup for $600.00

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 74

Welding Projects

Special Offers: See the latest Miller deals and promotions.