Hey gang. Have a 350LX and the high frequency cuts out after about 20 minutes of use. I pulled the side panel to observe the points and the arc is strong and constant then it just cuts off and if you touch the chassis you get a shock.
Anyone have experience with this?
Results 1 to 2 of 2
Thread: 350 LX High freq cuts out
06-12-2013, 02:52 PM #1Member
- Join Date
- Apr 2009
350 LX High freq cuts out
06-14-2013, 10:53 PM #2
Look close at the wiring. I found a wire that had layed on top of a screw and had shorted to the chassis. I just repaired the wire and all was good.Syncrowave 350lx
XMT 350 CC/CV
Hypertherm 1000 g3
Acer Ultima "Bridgeport Mill"
340hp Quincy and 400 gallon of air
Other doodads and a stoker coal stove