Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 8 of 8
  1. #1
    Join Date
    Apr 2013
    Posts
    7

    Default Vertical Welding SMAW

    Wondering if anyone knows any good manipulation techniques for 6010 groove welds in vertical uphand, 3/8 to 1/2" weld size.

  2. #2

    Default Vertical Welding SMAW

    Whip and pause... It's a fast freeze rod

  3. #3
    Join Date
    Apr 2013
    Posts
    7

    Default

    I am asking for weave techniques for 3/8 to 1/2" welds i understand it is fast freeze

  4. #4
    Join Date
    Oct 2005
    Location
    North Central Indiana
    Posts
    780

    Default

    I'm assuming the root and hot passes are already in. I don't think I ever weaved 6010 on those size welds in the vertical with 1/8 6010 rod. I just jump from side to side hesitating on the sides long enough to wash in and let the metal settle in the middle by itself. You are only suppose to weld 3X the diameter of the rod technically.
    Last edited by tackit; 06-07-2013 at 06:45 PM.

  5. #5

    Default Vertical Welding SMAW

    Why would you weave it? There are other rods for that what's the project

  6. #6
    Join Date
    Oct 2009
    Posts
    305

    Default

    My manipulation technique is to put down the 6010 and pull some 7018 from the oven
    Miller syncrowave 200 runner with coolmate 4
    and wp2025 weldcraft torch
    Miller 125c plasma cutter

  7. #7
    Join Date
    May 2013
    Location
    East Tenn
    Posts
    148

    Default Vertical Welding SMAW

    /\/\/\/\/\/\/\/\/\/\/\/\/\ :-)

  8. #8
    Join Date
    Apr 2013
    Posts
    7

    Default

    Haha, unfortunately I have to weave 6010 for class... i guess 5/32 rod might fill better, i would weave 7018 if it was up to me. Atm it is open corner 3g 1/2" plate, 1' long. for the test there is two fit ups, one is 6010 root and 7018 hot,fill and cap, and the other is all 6010. must be nick tested at 3,6,9 on both weldments

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 62

Welding Projects

Special Offers: See the latest Miller deals and promotions.

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 137