I have a large stack of 10 ga. sheets this shear will come in handy cutting up. It's a lot faster than setting up the plasma or torch, all I need is an extension cord and my straight edge...and plasma consumable will only continue go higher.
I bought the last one they had.. good price .
Results 1 to 10 of 33
Thread: Bought one of these today
05-31-2013, 08:01 PM #1
Bought one of these today
Last edited by tackit; 05-31-2013 at 08:04 PM.
06-01-2013, 05:10 AM #2
06-01-2013, 06:21 AM #3
Looking forward to the results. The shear can go as tight as a 2'' radius. Never used either for that thickness.
06-01-2013, 07:49 AM #4
I'll put some pictures of cuts up after I get it... I was debating between shear and nibbler, after considering what others that have used them said it seemed to me the shear fit my needs better.
06-01-2013, 06:56 PM #5Senior Member
- Join Date
- Dec 2007
Curious as to how long the blade will last on 10 gauge. I have one for lighter gauge but never use it. I dont like the distortion it makes. Also have a Modern nibbler but dont use it either.
Last edited by fabricator; 06-01-2013 at 07:00 PM.2, XMT's 350 cc/cv
1, XMT 350 vs
1, TRAILBLAZER 302
1, MILLER DVI
1, PASSPORT PLUS
1, DYNASTY 200 DX
1, MAXSTAR 150 STL
1, HOBART CHAMP
1, HF-251 BOX
2, 12-RC SUITCASES
2, 30 A spoolguns
06-01-2013, 08:56 PM #6
I use a product by Walter on all my cutting edges, the stuff really makes a difference in the quality of a cut, life of a cutting edge and the performance of a tool. I'll be using it on the shears too.
Last edited by tackit; 06-01-2013 at 09:01 PM.
06-02-2013, 05:36 AM #7Senior Member
- Join Date
- Jul 2010
What's the difference between that and the Makita JS3200? I recently bought a 3200 and like it.
06-02-2013, 06:06 AM #8
I can't imagine that being faster than a plasma unless you have it stored away. For me I just flip the switch & turn on the air. I too am curious as to the edge quality on 10 gauge.MM250
Lincoln ac/dc 225
MM200 black face
Whitney 30 ton hydraulic punch
Lown 1/8x 36" power roller
Arco roto-phase model M
Vectrax 7x12 band saw
Miller spectrum 875
30a spoolgun w/wc-24
06-02-2013, 08:25 AM #9
Glad you said you like yours. I have faith in the Makita brand.... if they say it was built to cut 10 ga I would assume the tool making nice clean cuts was on top of their list of things for the tool to accompolish.
Just like hacking with a to expensive to run plasma machine that sits in the corner... I use O/A and a tip cleaner mostly, they can stick their high price plasma consumables where the sun don't shine....metal doesn't know or care if it's cut by a saw, plasma or O/A outfit. or a Makita shears ...
06-02-2013, 09:31 AM #10Senior Member
- Join Date
- Dec 2011
Now you've peaked my interest. I've been considering a plasma cutter and it would be nice to hear the opposing viewpoint. Everyone I've talked to either owns one or sells them. They have all said they are the "greatest thing since sliced bread". But one has to realise that salesmen and those that have invested in something may be reluctant to diss it. What kind do you have and what has been your experience? I currently use a vertical band saw(Doall) power hacksaw, O/A torch,chop saw or strand mounted manual shear for cutting.---Meltedmetal
ps forgot about arcair, haven't used it in a while.
Last edited by Meltedmetal; 06-02-2013 at 10:17 AM.