Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 8 of 8

Hybrid View

  1. #1
    Join Date
    May 2013
    Location
    Oklahoma (Tulsa area)
    Posts
    6

    Default Trouble with High Frequency

    Hi guys,
    I am new to this forum and I am hoping someone can point me in the right direction to get rid of a gremlin I have in our welding shop.
    I am a maintenance technician/electrician at a welding school and I have suddenly had several welders go down, one on Saturday and three today not including a Lincoln welder that also went down Saturday.
    My problem is that the High Freq. mode has gone out and will not strike an arc. I had another Miller become erratic on Friday but I adjusted the spark gaps and I think that took care of that one.
    I really could use a suggestion or two to figure this one out. These are all Synchrowave 250 DX.
    Thanks in advance for any help.
    TwsSparky.
    Last edited by TwsSparky; 05-20-2013 at 01:10 PM. Reason: Forgot to add type of machine

  2. #2
    Join Date
    Oct 2004
    Location
    Edmonton, Alberta
    Posts
    7,609

    Default

    Ahhh, serial #'s determine machine age, and wiring diagram, there are many

  3. #3
    Join Date
    May 2013
    Location
    Oklahoma (Tulsa area)
    Posts
    6

    Default Serial

    Serial number on one is LK00009L

    Otherwise they are each identical.

  4. #4
    Join Date
    May 2013
    Location
    Oklahoma (Tulsa area)
    Posts
    6

    Default Article

    I called Miller yesterday and one of the technicians there e-mailed me an article from a Newsletter for Miller Service Agencies which has got me tracking again but as of yet have not found the problem.

  5. #5
    Join Date
    May 2013
    Location
    Oklahoma (Tulsa area)
    Posts
    6

    Default Solution to two of the welders

    After spending almost two days on the one welder I decided to check things on the other two that were giving no High Freq. and found that one needed the spark gap adjusted, and the other had an open 50 ohm WW resister. Once that was replaced it started working like a new welder.
    I am still stumped as far as the first one.

  6. #6
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    358

    Default

    First check your preflow setting if the welder has one. You only get gas until the preflow time times out. Second. look at the machine diagram and find the HF transformer primary. Should read around 110 volts ac. When HF is called for.
    Check 110 circuit breaker on the front of the welder. If it was tripped, no HF.
    If you have 110 volts, then you might have a problem with the HF cap, spark gap assembly or the HF transformer secondary. Secondary voltage is very high and will kill most meters, around 3000 volts, the cap can be measured, and the points checked for shorts.
    Have fun and be careful.
    Glenn 300 amp stick
    Millermatic 35
    L-tec plasma

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 74

Welding Projects

Special Offers: See the latest Miller deals and promotions.