I bought this machine a few months ago and just got it powered up went an got gas and thought I was ready to play..... i was wrong. It has spoolmatic one conversion kit setup for aluminium and worked great when i bought it. I took the cover of and the relay clicks but does not pull the contactor together when i push the contactor together the spool gun arcs. the spool gun feeds wire and gas just no arc any information would be much apreciated.
sincerely the newb..
Results 1 to 2 of 2
05-19-2013, 08:20 PM #1Junior Member
- Join Date
- May 2013
white face millermatic 35 wont arc!!
05-20-2013, 12:10 AM #2
So you'll need to determine if the relay contacts are bad or the contactor coil is bad.
Unit SN?MM200 w/spot controller and Spoolmatic 1
Syncrowave 180 SD
Bobcat 225G Plus LPG/NG w/14-pin*
*Homemade Suitcase Wire Feeder
*WC-1S & Spoolmatic 1
Marquette "Star Jet" 21-110