millermatic 250 the problem i'm not getting voltage to wire drive motor. there is a red lite on circuit board that comes on when trigger is pressed but goes right out. there does not seem to be voltage at the positive and negative lead lugs. should these be energized when trigger is pressed. Wondering if anyone has had this problem.
Results 1 to 1 of 1
Thread: Millermatic 250 not working
05-14-2013, 10:09 PM #1Junior Member
- Join Date
- Feb 2013
Millermatic 250 not working
Last edited by sircharles; 05-15-2013 at 12:14 AM. Reason: error