Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 10

Hybrid View

  1. #1
    Join Date
    May 2013
    Posts
    4

    Default tips for Dynasty 200dx purchace

    Hello, and thanks for taking some time to advise.
    I am going to look at a Dynasty 200dx machine tomorrow, ser # LJ130206L, the owner states 45 hrs of hobby use, I have seen other sellers list hours and torch strikes, how can I verify this when I go to see the machine? is this feature resettable thereby negating the authenticity of the info?
    I know that prices are all over the place for this, he is selling the machine for 3500.00 including 60cuft bottle, smith regulator, wp9, wp17 torches, 12 foot and 25 foot cable / hoses and covers, two ground leads one 25 and one 50 foot one is a clamp and the other is magnetic, a foot and also a finger controller, a bunch of consumables, and a cart

    in my heart I will offer him 2800.00 if it is all that he claims, 3100.00 if I can't leave without it.

    I can try it out but never having tig welded I don't know where and what to start to look for, I have weighed purchasing a diversion 165 new instead, but I have a bad habit of buying the best I can afford, this way I am the limiting factor and not the equipment

    thanks again for any useful input
    nic

  2. #2
    Join Date
    Feb 2012
    Location
    Wa
    Posts
    542

    Default

    There was just another thread where this was described like two days ago. Just look back a few days ago in a thread talking about a dynasty 200. I'm on my phone otherwise I would link you.

  3. #3
    Join Date
    May 2013
    Posts
    4

    Default

    Quote Originally Posted by Cgotto6 View Post
    There was just another thread where this was described like two days ago. Just look back a few days ago in a thread talking about a dynasty 200. I'm on my phone otherwise I would link you.
    thanks Sam I tried search previous to starting this thread and found nothing , I will try again

  4. #4
    Join Date
    Feb 2012
    Location
    Wa
    Posts
    542

    Default

    3 Arc Timer Display
    Upon power up as described above, the meter S LED will turn on, and arc time will
    be displayed for 5 seconds as [000 000] to [999 999]. The first four numbers indicate
    hours, and the last two numbers indicate minutes. Arc time shown in example is read
    as 1,234 hours and 56 minutes. Maximum arc time is 9,999 hours and 59 minutes.

    4 Arc Counter
    After 5 seconds, the meter A LED turns on, and the arc counter will be displayed for the
    next 5 seconds as [000 000 ] to [999 999 ]. The maximum arc cycle count is 999 999.

  5. #5
    Join Date
    Oct 2012
    Location
    yuba city, CA
    Posts
    49

    Default download the owner's manual

    Downloading the owner's manual will help you in so many ways--even
    prior to purchase.

  6. #6
    Join Date
    May 2013
    Posts
    4

    Default

    Quote Originally Posted by dave powelson View Post
    Downloading the owner's manual will help you in so many ways--even
    prior to purchase.
    yes I am in the midst of printing it

  7. #7
    Join Date
    Aug 2010
    Location
    Los Angeles
    Posts
    1,165

    Default

    That machine was built in 2008, so it may have the blue lightning arc start feature which is really nice. That is what I would hold out for at that price.
    Nothing welded, Nothing gained

    Miller Dynasty700DX
    3 ea. Miller Dynasty350DX
    Miller Dynasty200DX
    ThermalArc 400 GTSW
    MillerMatic350P
    MillerMatic200 with spoolgun
    MKCobraMig260
    Lincoln SP-170T
    Linde UCC305 (sold 2011)
    Hypertherm 1250
    Hypertherm 800
    PlasmaCam CNC cutter
    Fadal Toolroom CNC Mill
    SiberHegner CNC Mill
    2 ea. Bridgeport
    LeBlond 15" Lathe
    Haberle 18" Cold Saw
    Doringer 14" Cold Saw
    6 foot x 12 foot Mojave granite

  8. #8
    Join Date
    Aug 2010
    Location
    Los Angeles
    Posts
    1,165

    Default

    That machine was built in 2008, so it may have the blue lightning arc start feature which is really nice. That is what I would hold out for at that price.
    Nothing welded, Nothing gained

    Miller Dynasty700DX
    3 ea. Miller Dynasty350DX
    Miller Dynasty200DX
    ThermalArc 400 GTSW
    MillerMatic350P
    MillerMatic200 with spoolgun
    MKCobraMig260
    Lincoln SP-170T
    Linde UCC305 (sold 2011)
    Hypertherm 1250
    Hypertherm 800
    PlasmaCam CNC cutter
    Fadal Toolroom CNC Mill
    SiberHegner CNC Mill
    2 ea. Bridgeport
    LeBlond 15" Lathe
    Haberle 18" Cold Saw
    Doringer 14" Cold Saw
    6 foot x 12 foot Mojave granite

  9. #9
    Join Date
    Aug 2010
    Location
    Los Angeles
    Posts
    1,165

    Default

    That machine was built in 2008, so it may have the blue lightning arc start feature which is really nice. That is what I would hold out for at that price.
    Nothing welded, Nothing gained

    Miller Dynasty700DX
    3 ea. Miller Dynasty350DX
    Miller Dynasty200DX
    ThermalArc 400 GTSW
    MillerMatic350P
    MillerMatic200 with spoolgun
    MKCobraMig260
    Lincoln SP-170T
    Linde UCC305 (sold 2011)
    Hypertherm 1250
    Hypertherm 800
    PlasmaCam CNC cutter
    Fadal Toolroom CNC Mill
    SiberHegner CNC Mill
    2 ea. Bridgeport
    LeBlond 15" Lathe
    Haberle 18" Cold Saw
    Doringer 14" Cold Saw
    6 foot x 12 foot Mojave granite

  10. #10
    Join Date
    May 2013
    Posts
    4

    Default

    Quote Originally Posted by Cgotto6 View Post
    3 Arc Timer Display
    Upon power up as described above, the meter S LED will turn on, and arc time will
    be displayed for 5 seconds as [000 000] to [999 999]. The first four numbers indicate
    hours, and the last two numbers indicate minutes. Arc time shown in example is read
    as 1,234 hours and 56 minutes. Maximum arc time is 9,999 hours and 59 minutes.

    4 Arc Counter
    After 5 seconds, the meter A LED turns on, and the arc counter will be displayed for the
    next 5 seconds as [000 000 ] to [999 999 ]. The maximum arc cycle count is 999 999.
    thanks again this is what I was looking for

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.