ok, here we go. both sides inside need to be covered in 3/16 aluminum. im not sure if i should try and fill the holes with material and try to blend it in, or put a whole piece in front of each side. also, the transom has been cut and needs to be hinged. i dont know what route to go. i need to know what kind of hinges i need if i cant use one in picture having the door swing out. i need to know whats the easiest way to tackle this job would be and still look nice. i need some advice on this here guys. thanks for any help in advance, Joe



boat.jpg
boat1.jpg
boat2.jpg
boat3.jpg
boat4.jpg