Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 4 of 4

Thread: Wc-24

  1. #1
    Join Date
    Mar 2012
    Location
    Southwestern Ontario
    Posts
    44

    Default Wc-24

    The WC-24 controller the understanding I have of it is you slug it into the 14 pin connector and then it, takes the wires from it and uses the ones required to have a 10 pin? I was curious if I was to spend some time with a tester is I could get a 14 pin plug and also a 10 pin and make my own adapter or is it much more invoked than that? Thanks Jeff

  2. #2
    Join Date
    Sep 2005
    Location
    northern NJ
    Posts
    1,847

    Default

    It changes the voltage from 24v at the machine to 30 volts at the gun. I think?

    See below for a better explanation.
    Last edited by MMW; 05-08-2013 at 09:34 AM.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

  3. #3
    Join Date
    Oct 2004
    Location
    Edmonton, Alberta
    Posts
    7,731

    Default

    It takes the 24Vac from your machine, tosses it into a DC DRIVE controller, the 30A sends a potentiometer signal to it, and it sends out the 0-36dc volts to run the guns motor.

    Now if you can do that merely by switching a couple wires, giver.

  4. #4
    Join Date
    Mar 2012
    Location
    Southwestern Ontario
    Posts
    44

    Default Wc-24

    Ok thanks for the explanation, I thought it may be something simple but not quite! Thanks ill have to get a controller I was just trying to save a few bucks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.