Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2013
    Posts
    7

    Default Miller Bluestar 2E Not Reving up

    Just got a Miller Bluestar 2E AC/DC that was not welding or generating AC output traced it down to the Rheostat Replaced it and it is welding and generating power but now the engine does not rev up when trying to strike an arc for it to start a weld. The solenoid is working because I tried it by applying 12v directly and it does actuate and also to weld for now I flip the idle on and off to make it rev up to weld. Does PC1 control the reving up as well asthe idle down? Would appreciate any suggestions. Thanks

  2. #2
    Join Date
    Aug 2008
    Location
    Orange, TX
    Posts
    1,204

    Default

    A unit SN is needed to assure referring to the correct control schematic but you should have a low AC voltage (1-2 volts) at PC1 terminals F and H when welding.

    If not, current transformer CT1 may be defective. If yes, then idler control board PC1 is likely defective.

    Check all connections at PC1.
    MM200 w/spot controller and Spoolmatic 1
    Syncrowave 180 SD
    Bobcat 225G Plus LPG/NG w/14-pin*
    *Homemade Suitcase Wire Feeder
    *HF-251D-1
    *WC-1S & Spoolmatic 1
    PakMaster 100XL
    Marquette "Star Jet" 21-110

  3. #3
    Join Date
    Jan 2013
    Posts
    7

    Default

    S/N: JE97321 I will check for AC voltage while welding in PC1 at the pins you have indicated and will post results when I get them.

    Thank you for your help Duane

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.