Sculptors seem to recommend Permalac, so I bought some. Have not used it much yet. I understand Nikolas also has good clear.
Krylon Clear also seems to work OK. Just be sure to get the glossy.
Run a test piece before you coat your real work.
It is all in the prep, so sand/polish until you are happy, then put on clean new rubber gloves without a powder coat, and use solvent to clean any oils. I spray immediately after I use the solvent, (allowing time for any residual solvent to evaporate).
Results 1 to 10 of 11
Thread: Clear Coat - Mild Steel
04-27-2013, 11:03 AM #11Senior Member
- Join Date
- Sep 2009