Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 7 of 7
  1. #1
    Join Date
    Apr 2013
    Posts
    3

    Default econo twin hf help

    hi my name is zach i'm looking for a little help. i got a miller econo twin hf from a buddy for free and the only thing it is missing is the HF switch. I'm looking for somebody that can point me in a direction to purchace the switch or the instuctions to build one. The socket for the HF switch is a three wire and im told the switch is a on/off used for aluminum welding. my serial number on the welder is hf866259 if that helps. i will post pics of it also if i can figure out how. thanks everybody, Zach

  2. #2
    Join Date
    Feb 2012
    Location
    Wa
    Posts
    535

    Default

    Maybe try miller4less.com. Seen that posted here a couple times for replacement parts. Good luck with the new welder.

  3. #3

    Default

    Go to www.cyberweld.com type in the part number and they should have it. If they dont Airgas can usually get parts in within 3-5 days.

  4. #4
    Join Date
    Jul 2008
    Location
    Delhi, Ontario:
    Posts
    1,963

    Default

    Quote Originally Posted by zach 318 View Post
    hi my name is zach i'm looking for a little help. i got a miller econo twin hf from a buddy for free and the only thing it is missing is the HF switch. I'm looking for somebody that can point me in a direction to purchace the switch or the instuctions to build one. The socket for the HF switch is a three wire and im told the switch is a on/off used for aluminum welding. my serial number on the welder is hf866259 if that helps. i will post pics of it also if i can figure out how. thanks everybody, Zach
    Hi Zach,
    Yes post some pics.
    I bought one a few weeks ago as well, but I can't seem to find the Ser.#, where did you locate yours ?
    Are you talking about the Toggle switch on the front, or about the remote receptical on the front, that leads up to the torch on/off HF. button ?

    ...........Norm

    Sunrise Outside My Shop In Delhi, Ontario

    - Arcair- K 4000 CAC.

    - LN-25 Wire Feeder

    - Lincoln Ranger 8- Engine Drive- CC\CV:



    - Lincoln Power Mig 180C
    - Spoolgun.
    - DeWalt Chop Saw .
    - DeWalt Compressor - 13cfm, @ 100 psi.

    www.normsmobilewelding.blogspot.com

  5. #5
    Join Date
    Apr 2013
    Posts
    3

    Default

    hi norm my serial no is located directly above the AC/DC select switch.

    the switch i was looking for was the one from the receptical on the front that leads up the torch for the on/off for the HF. i down loaded a manual from miller and opened my welder up and it looked easy enough to make one so i built a switch with a momentary on off foot switch and the male plug in from platt electic it cost about $60 for the switch,plug, and cord.

    i will try again to get the pics up.

  6. #6
    Join Date
    Apr 2013
    Posts
    3

    Default





  7. #7
    Join Date
    Jul 2008
    Location
    Delhi, Ontario:
    Posts
    1,963

    Default

    Zach, Thanks a lot !
    Mine looks the same, except mine is all black on the front.
    No wonder why I couldn't find the serial # on mine, it's covered up by a saftey sticker....... lol.

    ...........Norm

    Sunrise Outside My Shop In Delhi, Ontario

    - Arcair- K 4000 CAC.

    - LN-25 Wire Feeder

    - Lincoln Ranger 8- Engine Drive- CC\CV:



    - Lincoln Power Mig 180C
    - Spoolgun.
    - DeWalt Chop Saw .
    - DeWalt Compressor - 13cfm, @ 100 psi.

    www.normsmobilewelding.blogspot.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 62

Welding Projects

Special Offers: See the latest Miller deals and promotions.

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 137