What is the maxium thickness the welder can weld (Aluminium). I see that the cut sheet specifies up to 1/4 inch. I was wonder what someones thoughts were as far as handling 1/4 inch material. Is this realistic or need do go with different machine.
Results 1 to 1 of 1
Thread: Anyone Own A Syncrowave 200
07-25-2006, 09:51 AM #1Junior Member
- Join Date
- Jul 2006
Anyone Own A Syncrowave 200
Last edited by Wild Bill; 07-25-2006 at 09:57 AM.