Thanks for the help Cgotto6 and everyone else. I feel better about doing the job after talking to you guys and doing some reading on Red Heads website.. The internet sure is a great help, I don't know how I would get by without it now.
The son is going to bring his drill to me when he gets a chance. He bought a new 1/2" SDS plus bit for the drill so I should be good to go.
Results 41 to 46 of 46
04-19-2013, 09:29 AM #41
04-19-2013, 10:17 AM #42
Here's the first job for the table crane after the Trubolts are embedded in the floor.
I'm going to take the 48" mower deck off my Snapper 2003K Z Zero Turn mower and use the table crane to hold the mower deck up so I can work on it comfortably. I need to change the blades and clean repaint the underside of the deck again.
04-21-2013, 01:01 AM #43
For the guys that suggested all thread. Terrible idea. Especially on something that someone wants to unbolt eventually. My experience with that has been a lot of them twisting off even with the concrete, and when that happens replacing a handrail on very little space to redrill its a royal pita. Unless your using gr8 all thread... which I don't see very often. I just like to do and to see people do things right the first time around
04-21-2013, 08:50 AM #44
04-21-2013, 09:16 AM #45Originally Posted by tackit:306297
04-21-2013, 09:55 AM #46