Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 18

Thread: PC400 bucket

Hybrid View

  1. #1
    Join Date
    Sep 2005
    Location
    northern NJ
    Posts
    1,821

    Default PC400 bucket

    Fixing a 66" bucket. New edge, shanks, & a few wear bars on top of the old ones. I fixed this bucket about a year ago when they snapped the cutting edge & up through the sides. Pulled it all back with chains & binders & welded it up cause they didn't want to spring for any new parts then. The cutting edge held up but was worn then & worse now. They snapped a corner shank off now while prying & the mechanic welded it together for short term.

    First pics are of the old repair. I don't actually have any finished ones of the old repair.

    0119021133.jpg0119021133a.jpg0119021133b.jpg0120020949.jpg0120020950.jpg
    Last edited by MMW; 04-06-2013 at 03:36 PM.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

  2. #2
    Join Date
    Sep 2005
    Location
    northern NJ
    Posts
    1,821

    Default

    This time they wanted me to just replace the shanks & build up the scallops in the edge. I talked them into a new edge also. So here is progress pics. Probably finish on Monday. Old edge out, & new edge & corner shanks in.

    0403031016.jpg0403031016a.jpg0403031659.jpg

    Forgot to mention I'm changing the shanks to Cat style. The new edge is 2" x 14" x 70". Welding with Tri-mark 777 & ESAB 7100 ultra.

    Edge, shanks, teeth & locks was $2783.00.
    Last edited by MMW; 04-06-2013 at 03:33 PM.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

  3. #3
    Join Date
    Apr 2006
    Location
    TAXACHUSSETTS
    Posts
    1,481

    Default

    Pretty sure you can buy that edge with the inner shanks already installed.I believe there molded into the edge.Cat and Esco if my memory is right,Just saves some time welding them inners on.Only have to do corners after lips in.For future if you do this another time.Btw looks good.
    Last edited by admweld; 04-07-2013 at 06:24 PM.
    BB402D
    TB300D
    DIMENSION652
    MM250X
    MAXSTAR140
    S-32 FEEDER W/1260 IRONMATE FC/GUN
    HT/PWR-MAX1250 PLASMA

  4. #4
    Join Date
    Mar 2012
    Location
    Southwestern Ontario
    Posts
    44

    Default PC400 bucket

    Where can you buy an edge with the teeth already welded on?? I have a bucket I need to do and I would look into it thanks

  5. #5
    Join Date
    Apr 2006
    Location
    TAXACHUSSETTS
    Posts
    1,481

    Default

    Quote Originally Posted by rustymfg@hotmail.com View Post
    Where can you buy an edge with the teeth already welded on?? I have a bucket I need to do and I would look into it thanks
    I didn,t say welded there molded in when manufactured.As i stated cat and esco offer this.
    BB402D
    TB300D
    DIMENSION652
    MM250X
    MAXSTAR140
    S-32 FEEDER W/1260 IRONMATE FC/GUN
    HT/PWR-MAX1250 PLASMA

  6. #6
    Join Date
    Aug 2004
    Location
    Milan Michigan
    Posts
    1,670

    Default

    Admweld, Dont you know what kind of site this is.

    I heard the molded one break off really easy and are junk so you always want to buy them separate and have us WELDERS WELD THEM ON .

    Theres nothing I like better than cutting into an old bucket, putting wear bars in, A little line boring here and there.

  7. #7
    Join Date
    Sep 2005
    Location
    northern NJ
    Posts
    1,821

    Default

    Finished pics. Edge & shanks are on. Added some wear bar sections on top of the worn ones. Added a couple plates behind the edge on the inside as it's wearing thin from the inside since it has 2 layers of bar on the outside.

    0408031305.jpg0408031305a.jpg
    Last edited by MMW; 04-09-2013 at 07:00 PM.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

  8. #8
    Join Date
    Aug 2004
    Location
    Milan Michigan
    Posts
    1,670

    Default

    Geez ooo peeets, That thing is never going to wear out.

    Nice job MMW

    Between you making things that never wear out and admweld telling people about moe boards with molded in shanks.

    I'm never going to have anything to weld.

  9. #9
    Join Date
    Apr 2006
    Location
    TAXACHUSSETTS
    Posts
    1,481

    Default

    Quote Originally Posted by Portable Welder View Post
    Admweld, Dont you know what kind of site this is.

    I heard the molded one break off really easy and are junk so you always want to buy them separate and have us WELDERS WELD THEM ON .

    Theres nothing I like better than cutting into an old bucket, putting wear bars in, A little line boring here and there.
    When the customer buys the stuff and dumps it at your shop you don,t have much choice at the point.Thats how i had seen that style before.And yes i will agree with the aftermarket supp
    lies on cost.I usually use hensley from my supplier around here.
    Last edited by admweld; 04-16-2013 at 02:58 AM.
    BB402D
    TB300D
    DIMENSION652
    MM250X
    MAXSTAR140
    S-32 FEEDER W/1260 IRONMATE FC/GUN
    HT/PWR-MAX1250 PLASMA

  10. #10
    Join Date
    Apr 2008
    Posts
    254

    Default a couple more questions...

    The new edge you put on, did you preheat and/or post-heat that before/after welding on it? Was it an AR steel or something else?

    The shank welds were hard faced or left as is? If not hardfaced it seems they would wear pretty fast.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 62

Welding Projects

Special Offers: See the latest Miller deals and promotions.

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 137