Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 13

Threaded View

  1. #11
    Join Date
    Dec 2012
    Location
    Sweetwater, TX
    Posts
    201

    Default

    Scales would be as follows
    40-130A range (each step is 10 Amps)
    1 - 40A
    2 - 50A
    3 - 60A
    4 - 70A
    5 - 80A
    6 - 90A
    7 - 100A
    8 - 110A
    9 - 120A
    10 - 130A

    60-160A range (each step is 11.11 Amps)
    1 - 60.0A
    2 - 71.1A
    3 - 82.2A
    4 - 93.3A
    5 - 104.4A
    6 - 115.5A
    7 - 126.6A
    8 - 137.7A
    9 - 148.8A
    10- 160.0A

    80-225A range (each step is 16.11 Amps)
    1 - 80.0A
    2 - 96.1A
    3 - 112.2A
    4 - 128.3A
    5 - 144.4A
    6 - 160.5A
    7 - 176.6A
    8 - 192.7A
    9 - 208.8A
    10 - 225.0A

    100-250A range (each step is 16.66 Amps)
    1 - 100A
    2 - 116.6A
    3 - 133.3A
    4 - 150.0A
    5 - 166.6A
    6 - 183.3A
    7 - 200.0A
    8 - 216.6A
    9 - 233.3A
    10- 250.0A

    Not having one in front of me this would only be the case if the knob only goes down to 1 and stops and up to 10 and stops. If it goes below 1 like to a 0 value or higher than 10, then I would need to recalculate the steps.
    Last edited by clint738; 04-05-2013 at 12:26 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Welding Projects

Special Offers: See the latest Miller deals and promotions.