Hey folks,
I'm current in transition of living quarters and need a garage for tools and storage. I also want to be able to set up a small shop. I have found a local storage facility. (Anchor Storage) that offers a unit that is 15'x45' with 50 Amp service.
Is this enough to power my Diversion 165?
Results 1 to 5 of 5
Thread: Diversion 165 and 50 amp service
-
03-14-2013, 08:36 AM #1
Member
- Join Date
- Aug 2010
- Posts
- 75
Diversion 165 and 50 amp service
-
03-14-2013, 08:42 AM #2
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,636
Yes, that will be fine for the 165
Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
03-14-2013, 08:48 AM #3
Senior Member
- Join Date
- Apr 2010
- Posts
- 141
30 Amp, 240 Volt is plenty. When they say "50 A service", I hope that's not two 15A and one 20A at 120V.
Do they actually allow welding?
-
03-14-2013, 12:47 PM #4
Member
- Join Date
- Aug 2010
- Posts
- 75
It was as advertised.
It is a 15x45 Storage unit with two different connector for the 220. I was impressed. I think I will probably get the unit for a couple of months.
-
03-14-2013, 05:05 PM #5
Senior Member
- Join Date
- Nov 2012
- Location
- Northern Arizona
- Posts
- 269
Whoops, you have a double post and I responded in the other thread. You're good.
MillerMatic 251
CST 280 w/tig torch
HF-251-D1
Cutmaster 42
Victor Journeyman OA
A rockcrawler, er money pit, in progress...
Reply With Quote
