Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 6 of 6

Thread: Steel Prices

Hybrid View

  1. #1

    Default Steel Prices

    I'm just a beginner and purchase little so I know I'm not going to get big boy discounts but I hope to be as frugal as possible about what I purchase. I almost had a heart attack the first time I went to the steel store (not Lowes/Home Depot).

    I've used this web site before just to get an idea of what something might cost as opposed to what I have to pay at the steel store. I don't buy here as the shipping makes it unreasonably priced for the little guy.

    http://www.metalsdepot.com/index.php

    I know prices vary a lot here and then and when, etc. but how much of a price guide can I assume this to be?
    ==============
    Miller 211 MVP
    Hobart StickMate LX 235
    Lincoln AC 225
    CutMaster 42

  2. #2
    Join Date
    Feb 2013
    Location
    NJ
    Posts
    19

    Default

    I used that exact website to see what I would be paying for a 2'x4'x1/4" steel plate...when I got to the local metal supplier the plate was less than half that sites quote (without calculating shipping).....call the shop you are going to buy from to get an accurate price
    Multimatic 200 w/ Tig kit & Spoolgun
    Victor Torch
    Accumulating as I go

  3. #3
    Join Date
    Oct 2006
    Location
    Illinois
    Posts
    588

    Default

    Tell us your location. Prices in your area will vary.

  4. #4
    Join Date
    Jun 2009
    Location
    greenfield new hampshire
    Posts
    858

    Default

    any thing from a buck a pound down to about 65 cents is a range that is most likely what you will run into, just guessing, of cource

  5. #5
    Join Date
    Apr 2008
    Posts
    254

    Default

    You should consider scrap if thats available to you. I used to live very near an excellent scrap yard allowing me to rarely buy new. Depending on weight purchased, price varied between .25 and .35/lb. For sure you'll have to work w/i whats available but I didnt find that too difficult.

  6. #6
    Join Date
    Jan 2013
    Location
    NE Illinois
    Posts
    155

    Default

    I found a pretty good source of steel about 10 miles NW of Chicago. He charged me $0.90/lb for anything I wanted. Lots of 1/8" up to 1 1/4" stuff. They build Industrial Machinery so they are mostly cut-offs and such, both large and small. He said he could also cut me some 1/8" or thicker plate and he would still charge the $0.90/lb. I didn't see much in the way of sheet steel, but his prices are the best I've found so far near me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Welding Projects

Special Offers: See the latest Miller deals and promotions.