sign with flames.jpgsign with flames 2.jpg
the sign frame was made with a Hossfield bender using 1" (1 3/8" O.D.) schedule forty pipe.
I took the frame to Quality Powder Coating in Dallas and they did three heats, red, yellow, and then white and then added a couple of coats of clear. Sign will outlive me.
Results 1 to 7 of 7
03-08-2013, 08:16 AM #1Senior Member
- Join Date
- Sep 2006
Hot pipe, red, yellow, then white
Last edited by wroughtnharv; 03-08-2013 at 08:18 AM.