Any New Jersey shops have an aluminum hookup?

[turbo38t]

I'm looking to buy a 4x8 sheet of 3/16" 3003 aluminum plate and a 4x8 sheet of 1/8" 3003 aluminum. Anyone have any or know of a good shop to deal with near the Jersey shore. I usually use Ed's Trading Post but won't have time to call til tomorrow and honestly would like to find someone closer. Thanks. Dave

[Burnt hands]

Joseph Fazzio Inc is where I go to get my metal pieces.

They have a location in Glassboro and Farmingdale.

http://www.shopjfi.com



Joseph Fazzio, Incorporated (Main Facility)
2760 Glassboro-Cross Keys Rd.
Glassboro, New Jersey 08028
Phone: (856) 881-3185 | Fax: (856) 881-0214 | Fax (Accounting): (856) 881-6321
Products: Steel & Metals, Industrial Hardware, Fasteners, Construction Equipment, & Surplus
Services: Sawcutting, Shearing, Punching, Bend Forming, Shot Blasting, Computerized Flame & Plasma Cutting
Hours: Monday thru Friday: 8:00 am to 5:00 pm, Saturday: 8:00 am to 12:00 pm, Sunday: Closed



Steel & Metal Liquidators, LLC
407 Old Airport Rd.
New Castle, DE 19720
Phone: (302) 322-9960 | Fax: (302) 322-9961
Products: Steel & Metals, Industrial Hardware, Fasteners, Construction Equipment, & Surplus
Hours: Monday thru Friday: 7:30 am to 4:00 pm, Saturday: 8:00 am to 12:00 pm, Sunday: Closed


Joseph Fazzio - Wall, LLC
5001 Routes 33 & 34 (at Circle)
Farmingdale, New Jersey 07727
Phone: (732) 938-5501 | Fax: (732) 938-5502
Products: Steel & Metals, Industrial Hardware, Fasteners, Construction Equipment, & Surplus
Hours: Monday thru Friday: 7:30 am to 4:30 pm, Saturday & Sunday: Closed


Joseph Fazzio - Pottsville, LLC
1584 Bunting St.
Pottsville, PA 17901
Phone: (570) 391-0141 | Fax: (570) 399-5180
Products: Steel & Metals, Industrial Hardware, Fasteners, Construction Equipment, & Surplus
Hours: Monday thru Friday: 7:30 am to 4:30 pm, Saturday: 7:00 am to 12:00 pm, Sunday: Closed

[go2building]

I use R S Phillips in Vernon NJ, prices are a little high, it's only a mile or so from my house though. They are also a full feb shop and supplier. They do all the sheering and bending I need.

[MMW]

Samson Metals in Cranbury, NJ. Don't know if they are competitive or not.

http://www.sam-metals.com/

[Art.]

Fazzio's in Wall Twp. 732 938 5501

[Hammer65]

I use Fazzio's right on the 33/34 circle

[turbo38t]

Thx guys. Ended up using Perlin Steel in Newark. $275 for a 5x10 sheet of 1/8" 3003 sound decent?

I use Fazzio's right on the 33/34 circle

[turbo38t]

Change that....Perlin was very helpful but couldn't get the sheet in time. I ended up using Edward's trading post which I have used many times before in Great Meadows, NJ. They stock plate aluminum. I picked up a sheet of 5000 1/8 alu, sheeet of 3/16 5000 alu....and 1 sheet of 11 gauge steel.....alll 4 x8 sheets.....$519 out the door....

Thx guys. Ended up using Perlin Steel in Newark. $275 for a 5x10 sheet of 1/8" 3003 sound decent?