Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2012
    Location
    East Central ND
    Posts
    9

    Default It followed me home! Airco 250

    I was at the local welding shop and asked it they had a used Dial Arc 250? No they said, but we have a really cheap old Airco 250 ac/dc that works well. It is an Airco 250 amp AC DC MSM Bumblebee II, SN HD695830. Has the amp crank in the middle of the front plate. Did a search on this forum, and found some similar units and links to the appropriate manual, but nothing exact. Will one of the wise members help me out on a really cheap deal? I am looking for the Miller manual that will match up. Thanks all, and I really enjoy reading this forum.

  2. #2
    Join Date
    Dec 2007
    Location
    PA
    Posts
    329

    Default

    Does it look like this?

    Stock number: 1341-0260 thru 1341-0265
    Attached Images Attached Images
    Thermal Arc GTSW400, Airco Heliwelder II, Miller Dynasty 350, Hypertherm 1000, oxy-fuel setup, metal cutting bandsaw, air compressor, drill press, etc.:

    Call me the "Clouseau" of welding !

  3. #3
    Join Date
    Apr 2010
    Posts
    253

    Default

    Is it this manual?

    http://www.millerwelds.com/om/o313_mil.pdf

    Edit: Just for anyone's future reference, the Miller AC/DC model name is "Two Fifty Twin".
    Last edited by USMCPOP; 03-08-2013 at 05:53 AM.

  4. #4
    Join Date
    Jun 2012
    Location
    East Central ND
    Posts
    9

    Default airco

    That is the right picture, and the looks like the right manual. Thank you very much. D6Joe

  5. #5
    Join Date
    Apr 2010
    Posts
    253

    Default

    Hopefully you got a good price. That was built about the same year as my old Dialarc.

  6. #6
    Join Date
    Jun 2012
    Location
    East Central ND
    Posts
    9

    Default

    No leads, but only $100. And I made them test the ac and dc before I would buy it.

  7. #7
    Join Date
    Sep 2005
    Location
    Houston, TX
    Posts
    857

    Default

    Quote Originally Posted by d6joe View Post
    No leads, but only $100. And I made them test the ac and dc before I would buy it.
    You can go to jail for stealing! Great find, leads will set you back more than the machine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Welding Projects

Special Offers: See the latest Miller deals and promotions.