Whats a good tubing cutter for stainless boat railings? I want to buy some railing and practice on it just in case I get the chance to do some railing. I don't live on the coast but we do have a few lakes and a good many boats in the area.
I don't like learning on a persons job which is often the case with so many different things people bring.
The tubing cutters I am finding are the same as you would use to cut copper pipe but that type of SS I am talking about is pretty tough.
Results 1 to 8 of 8
Thread: Tubing Cutters
03-06-2013, 09:36 AM #1
03-06-2013, 10:35 AM #2Nothing welded, Nothing gained
3 ea. Miller Dynasty350DX
ThermalArc 400 GTSW
MillerMatic200 with spoolgun
Linde UCC305 (sold 2011)
PlasmaCam CNC cutter
Fadal Toolroom CNC Mill
SiberHegner CNC Mill
2 ea. Bridgeport
LeBlond 15" Lathe
Haberle 18" Cold Saw
Doringer 14" Cold Saw
6 foot x 12 foot Mojave granite
03-06-2013, 11:03 AM #3
Thanks, that looks good. Going to try the West Marine Store this weekend and see if I can pick up some pricey practice tube.
It grips me to pay for something like that to make scrap out of but I see no other way to learn it and will also see what it takes to finish it.
Guess you can't put a price on the knowledge you keep.
Holly Crap, scrap that west marine idea, if the store carried the 20 foot length like the website it is 470 bucks.
03-06-2013, 12:56 PM #4
03-06-2013, 07:35 PM #5Senior Member
- Join Date
- Apr 2009
- Upstate SC
I've made hundreds of cuts on SS over the years at work. We always used Swagelok cutters and if you can find one it will last forever.
I would recommend Rigid cutters for larger tubing.
CGOld Miller Swinger 180 Buzzbox
Miller Diversion 165
1945 Craftsman Atlas Lathe
03-06-2013, 11:42 PM #6Senior Member
- Join Date
- May 2007
- Los Angeles
westmarine is very expensive. i wouldn't buy anything from them unless you have to. That tubing is just 304 1/16" thick i believe. any metal supply house would have it.
03-07-2013, 04:48 AM #7
I used a small Imperial Eastman tubing cutter with a steel wheel installed to cut a lot of 1/2" SS tubing for a gas compressor engine mod project. The cutter shovelon showed looks to be a larger Imperial.
03-07-2013, 11:59 AM #8
Thanks for the info, I'll be looking at source of tubing before anything else now.
I knew it was not cheep but never knew it had gold in it. May even invest in it, LOL
But I think now any SS tubing would be practice and worry about the finish later so buying that precious metal might have to wait.
I have a couple sets of tubing cutters I use for copper, at some of the suggested sites there are plenty of replacement wheels, might try one of those.
Yesterday a friend who runs the local prop shop said he doesn't see much of a need for railing repair.
The boat dealer's he does work for usually ask him to do any other welding they need and he has never been asked to repair SS railing.
He works for a bunch of dealerships and been at it for 25 years. So maybe its not a project that should be at the top of my idea list.
Speaking of which, I have some other idea's, guess thats another post.