Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2013
    Posts
    3

    Default Millermatic 175 Relays CR2 CR3

    Relays CR1, CR2 and CR3 not operating. I realize CR1 is operated after CR2 and CR3. I have 24vdc across C45 which is produced from fan coil and somehow I think this is fed to relays but only measure around 5v across relays CR2 and CR3 when trigger is operated. Need help as there is no schematic of circuit board 207466.

  2. #2
    Join Date
    Dec 2011
    Posts
    401

    Default

    If there are no toasted to black components on the board, can you draw your own schematic? It's a tedious process but usually can be done if you can identify the parts.
    Meltedmetal

  3. #3
    Join Date
    Mar 2013
    Posts
    3

    Default

    I am in process of tracing circuit on board now. Was hoping someone would have already done that and could speed up the process for me.

  4. #4
    Join Date
    Mar 2013
    Posts
    3

    Default PTC2 open

    Found PTC2 open. Need Part number as component is too small to get info off of. Got part info from Miller tech. It was a 200ma resettable fuse. Problem solved thanks to Miller Tech Support.
    Last edited by jones144; 03-07-2013 at 10:58 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 82

Welding Projects

Special Offers: See the latest Miller deals and promotions.