This is one of my newest videos, and it's a little crash-course in hardfacing with a stick welder...
To be honest, its a little outside my area of experience, but I'd had a LOT of requests for a hardsurfacing video, so I researched it for hours, practiced a little, and put this together... Hopefully, if you're interested in hardfacing, this will be enough to get you started
Anyway, this is one of those cases where a picture is worth a thousand words, but I'll do my best to describe it for anyone who cant/doesn't want to watch the video itself... I talk a little about what hardsurfacing is, and about preparation for the process... It goes over putting down a "buttering layer" of softer metal to act as a go-between for the softer base metal, and harder "cover layer", and also to repair the base metal... I even wear an apron in this video
Just thought I'd share... Have an awesome Tuesday, everyone!!
(I'll have more videos here soon... Although Im currently on "forced vacation" after damaging a camera during a welding shot... Best Buy has it now, the protection plan I bought with the camera covered the new lens, but it'll probably be a week until I can make more videos )
Results 1 to 2 of 2
Thread: HardSurfacing 101 (Video)
03-05-2013, 10:47 AM #1Member
- Join Date
- May 2012
HardSurfacing 101 (Video)