I am in the process of looking for a plasma cutter... I have a Guy that has one for sale but said the power reg knob was broken? How hard and expensive is this to repair? And secondary is there a way to test it with the reg knob broken? Thx for the help! Vance
Results 1 to 4 of 4
Thread: hypertherm powermaxx 600
-
03-05-2013, 07:48 PM #1
Junior Member
- Join Date
- Mar 2013
- Posts
- 2
hypertherm powermaxx 600
-
03-05-2013, 08:43 PM #2
Senior Member
- Join Date
- Oct 2005
- Location
- North Central Indiana
- Posts
- 637
The curent adjustment knob part number is 008965
The book doesn't show a PN for the pressure regulator's knob. The closest I can come is what they call the filter regulator subassembly, PN 011083, the company might have the knob in stock.
-
03-06-2013, 07:10 AM #3
Junior Member
- Join Date
- Mar 2013
- Posts
- 2
OK great! That gets me going in the rite direction. Is this part expensive to fix? What exactly does this part do? Thx again for the help! Vance
-
03-06-2013, 11:43 AM #4
Senior Member
- Join Date
- Oct 2005
- Location
- North Central Indiana
- Posts
- 637
vancass the parts manual doesn't give prices. but I don't see why they wouldn't have a knob on the shelf. If you have to buy the whole regulator see if you can have it come off the price of the machine. The regulator comes with a filter and o- ring, I would buy them both for spairs while I was ordering parts. The regulator doesn't look hard to install. Good luck
Reply With Quote
