What U see here is the front bracket that holds the lower bar in a triangulated 4 bar rear suspension. There was no way to weld to the bottom of the frame, brackets for running boards, so this is how I was told to mount them.
Will welding the wings to the frame (red lines), as well as along the bottom seam where the bracket sits on top of the frame lip, be strong enough to hold this suspension component or should I add plates someplace?
This is a street rod, (39 Chevy) not a race car. Suspension will be ShockWaves by Ride Tech. Any advice is appreciated.
Results 1 to 10 of 13
Thread: Need advice on bracket supports
03-03-2013, 08:37 AM #1Junior Member
- Join Date
- Mar 2013
Need advice on bracket supports