http://new.livestream.com/hsperformance/events/1914328
H&S is trying to break a 6.7l scorpion turbo diesel and see how much power it can take. Stock tranny and bottom end of the motor. They baselined it with fuel only at 600hp, added a 60 shot of giggle gas and got 700, put a bigger solenoid on and a bigger shot and got 750hp. It is still kicking. time for more nitrous and see if they can get 800hp.
Results 1 to 6 of 6
Thread: FORD 6.7l breaking point
-
02-28-2013, 02:08 PM #1
Senior Member
- Join Date
- Nov 2012
- Location
- Northern Arizona
- Posts
- 269
FORD 6.7l breaking point
MillerMatic 251
CST 280 w/tig torch
HF-251-D1
Cutmaster 42
Victor Journeyman OA
A rockcrawler, er money pit, in progress...
-
02-28-2013, 03:26 PM #2
Senior Member
- Join Date
- Nov 2012
- Location
- Northern Arizona
- Posts
- 269
Well they made 884hp and 1674ft/lb of torque and then the transmission failed. Not too bad.
MillerMatic 251
CST 280 w/tig torch
HF-251-D1
Cutmaster 42
Victor Journeyman OA
A rockcrawler, er money pit, in progress...
-
02-28-2013, 09:53 PM #3
Senior Member
- Join Date
- Aug 2008
- Posts
- 103
FORD 6.7l breaking point
junk
-
04-28-2013, 07:56 PM #4
Senior Member
- Join Date
- Feb 2007
- Location
- asheville n.c.
- Posts
- 595
Mike good rules you drool
-
04-28-2013, 07:57 PM #5
Senior Member
- Join Date
- Feb 2007
- Location
- asheville n.c.
- Posts
- 595
Ford rules you drool:-P
-
05-03-2013, 12:26 AM #6
Senior Member
- Join Date
- Nov 2012
- Location
- Northern Arizona
- Posts
- 269
Haha. I am not a ford guy. But I find motor sports stuff interesting. Some of the custom turbo work I've seen on modern diesel trucks is awesome. Some very precise Fab work. Thought there might be a person or two interested here. Geesh guys.
MillerMatic 251
CST 280 w/tig torch
HF-251-D1
Cutmaster 42
Victor Journeyman OA
A rockcrawler, er money pit, in progress...
Reply With Quote
