new gun

[ryarelliott]

I'm looking to buy a new lead and gun for my mm252. Are the Bernard leads worth the extra money compared to the mig matic guns?

[big mike]

Try a Bernard Q gun with Centerfire consumables and I'll bet you will like it better than the M series that came with your machine.

[weld007]

Yes a Bernard is worth it best gun you can get, i know i wont buy anything else.

[Lund Machine Works]

I have and have had Bernard guns. I even have a brand new one from my Pipeworx, it was never put on when I set it up. They are a POS for pulse welding, there is way to much drag in the tips. If you really want something good go Binzel or Tweco.

[walker]

They work fine. Not a lot different than the M-25, though bigger cable and a bit more stout. Either can be had on EPay for about $100 shipped.

[Texas113]

I like the Tweco guns as a replacement or upgrade. I have only used a Bernard a time or two at a friends shop. I may have gotten lucky but the Tweco has lasted a very long time and has taken two years of heavy shop use.

[TxDarth]

I like the Tweco guns as a replacement or upgrade. I have only used a Bernard a time or two at a friends shop. I may have gotten lucky but the Tweco has lasted a very long time and has taken two years of heavy shop use.

If I were to replace the M20 gun on my 211 AutoSet with one of these which would you recommend?

[aametalmaster]

If I were to replace the M20 gun on my 211 AutoSet with one of these which would you recommend?

If it were me i would buy an M-15 or the M-150 new number mig gun for your 211 to use with lighter metals and the M-25 for use with the heavy...Bob

[strictlycarved]

Buy a tweco. Cheaper consumable are far more durable. Was never a huge fan until my q300 broke and switched to tweco last year best move yet.