Howdy all, first post here, But I am in search of a part that I gone and done busted.
I need the rotor adapter plate that goes onto the engine crankshaft as I busted the one I had trying to get it to pop off the taper. I am hoping maybe someone has a good used one? part number I need is 021-934 engine is a OH160 16HP Tecumseh. Miller Welder is a Blue Star 2E
Any info or leads to a good part would be much appreciated!
Thanks, Shawn
Results 1 to 6 of 6
Thread: Blue Star 2E part needed
-
02-16-2013, 01:50 PM #1
Junior Member
- Join Date
- Feb 2013
- Posts
- 3
Blue Star 2E part needed
-
02-18-2013, 01:17 PM #2
Junior Member
- Join Date
- Feb 2013
- Posts
- 3
nobody?
-
02-18-2013, 02:08 PM #3
Senior Member
- Join Date
- Jul 2010
- Location
- Four Flags city
- Posts
- 236
-
02-18-2013, 02:11 PM #4
Junior Member
- Join Date
- Feb 2013
- Posts
- 3
yikes!!
Hoping to find someone that had a good used one maybe?
-
02-18-2013, 03:19 PM #5
Senior Member
- Join Date
- May 2011
- Location
- Bossier Parish La.
- Posts
- 385
You could check with a local small engine shop that deals with Tecumseh engines. Have the broken pieces with you so they can see what it is supposed to look like. Worth a shot. Or find someone that can weld it back together for you. It might need a little machine work afterward.
-
02-18-2013, 06:03 PM #6
Member
- Join Date
- Feb 2012
- Posts
- 82
We're are you located there's a old fellow over here that works on welders keeps a lot of old stuff around there I could call him if you don't find anything he is kinda grouchy but he is good and may have something he is in north zulch tx
Reply With Quote
