I like to take care of my equipment when it is stored and really like the cover I have for my Millermatic 140c mig welder.
I have been looking at the CST 280 for a stick welder and making a list of all the accessories I will need to get but I don't see a cover that is mentioned to fit it.
The Maxstar 200 is 17.5" long while the CST 280 is 18" long. The Dynasty 200 is 21.5" long which seems way too long.
So I'm not sure how tight the tolerances are on the covers and if the one for the Maxstar 200 will fit the CST 280 or if it will be too tight?
Anyone know which Miller cover will properly fit the CST 280?
Results 1 to 4 of 4
02-15-2013, 10:51 AM #1Senior Member
- Join Date
- Dec 2012
- Sweetwater, TX
Why no welding cover specific for the CST 280 ?
02-15-2013, 04:03 PM #2Senior Member
- Join Date
- Sep 2005
- WY...armpit of U.S.A.
I've no specific answer for your welder, but when I needed one for my Lincoln TIG and one wasn't available I headed over to the nearest upholstery shop and had the gal fab one up out of heavy Cordura. Cheaper than what was available...or in this case, not available...and a custom fit that even has the provision for the Argon tank size I am using. so, if you can do without the logo, it might pay to hit the upholstery shops in your area.Miller 251...sold the spoolgun to DiverBill.
Miller DialArc 250
Lincoln PrecisionTig 275
Hypertherm 900 plasma cutter
Bridgeport "J" head mill...tooled up
Jet 14 X 40 lathe...ditto
South Bend 9" lathe...yeah, got the change gears too
Logan 7" shaper
Ellis 3000 band saw
Hossfeld bender w/shopbuilt hyd.
Victor Journeyman torch and gauges
3 Gerstner boxes of mostly Starrett tools
Lots of dust bunnies
Too small of a shop at 40 X 59.
02-15-2013, 04:08 PM #3
A $10 beach towel will keep the crap offNick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
60" X 60" router/plasma table
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff
02-15-2013, 07:53 PM #4Senior Member
- Join Date
- Jan 2008
machine is the same size.
The maxstar cover should fit. The cover does not have "maxstar" printed on it. The maxstar200 and cst280 seem to share the same case. If you are that worried ask Miller to try the cover.