Bobcat 250

[Hardrock40]

Looking at buying a used engine drive. Can't find specs on the older welders and don't know how old they are by looking at a photo.

Could someone tell me about this one? I would like to know the weight, the new weights are listed as lighter and smaller.

Bobcat 250.jpgBobcat 250.jpg

[Kpack]

Have you looked at miller site on manuals should give all the specs
http://www.millerwelds.com/om/o4419u_mil.pdf
this is with the Subaru engine it should give the specs

[Hardrock40]

The one in the post has a kohler engine, your link shows 562lbs where the new 250 is 501lbs so I think your link is the correct one. How in the world they could drop 61lbs, I don't know.

Looks like both engine machines weigh the same. Gesh that's heavy. The new 225 is 480lbs. Actually that's the one I want, 225. due to its size and weight. But if the used 250 turns out to be a good deal I sure would like it.

Thanks for the link, I couldn't find it for some reason, I was only finding the new model specs.

[Kpack]

It's under resources I just picked one of the units I didn't know the motor

[BD1]

Here's MILLER chart using serial number to determine year of machine
http://www.millerwelds.com/service/s...reference.html

Here's the manual site when you know serial number.
http://www.millerwelds.com/service/ownersmanuals.php

[MMW]

If your worried about weight don't forget to add fuel & oil plus leads & rods. You could be adding another 200# easily.